thank you I will shoot the tractor breakers Michael suggested a picture and see how I get on, do Germans appreciate a foreigner trying to speak the language, or is it case that you can offend which has been my experience in france!! Here we try and…

How would you ask for a draw bar or hitch in German , what do you call it or refer to it as

I know the pressure control system in the picture is a bit of topic but I just wanted to show this as it was commonly used in the uk where I'm originally from and ireland where I live now , in conjunction with the aforementioned draw bar system. I…

this is a picture of a pressure control system used on a trailer just out of interest , these where used in the uk before 4 wheel drive to increase traction it sort of worked

the tractor in the picture is very similar in design to what I had on my massey ferguson 565 there's actually no additional hydraulics involved, but a rod either side that goes from the draw bar mounting to the top link arms , the draw bar is hinged at…

i was thinking that might be the case I have no real problem with using either the first or second option posted by Michael, its just I'm used to the set up in the photo of the the tractor for sale as I said this was pretty much what was offered in the…

this shows the mounting attachment on my tractor which I think is standard for the model

this is the mounting I have on the tractor

this shows the pick up hitch I don't know if this was ever sold in Germany but in the uk and Ireland this was commonly fitted on tractors you can see the release mechanism is cable operated this drops the hitch so you can reverse up to the trailer or…

Hi Tobias, Michael and f-jm 1986 thank you all for taking the time to reply to my post if you ever find yourselves in my corner of Ireland I will take you for a couple of pints of the black stuff (Guinness or if you're really going for it jamessons…

or would any one here have one for sale
I can be contacted ++353 894170150 or via email phillrichardsonsaddlery@gmail.com

Good morning all Phill the saddler here in Ireland I am back to you again after my success with sorting out our hydraulics problem. I am trying to find a hitch/ draw bar assembly for our 1984 fendt farmer 103ls I've had no luck tracking one down here in…

you can see the cylinder nr4 in the diagram at what appears the base of it is an oring nr3 is it possible to replace this without taking the entire top cover off or will it slide out of the housing if so how do you remove it as mine is very tight in…

hi everyone just a quick update on the hydraulics on my fendt farmer 103ls,I had a problem with my hydraulic oil leaking into the gearbox this problem was very quickly identified by members here and links where sent explaining what needs to be done to…

do you make rear wing for the fendt 103ls cab?

did you find an answer to the question as mine does exactly the same thing in the same area I presumed it was a defective O ring on the cap. I am also in the process of replacing the seals in the lift cylinder

if anyone is trying to pull the piston out of the three point linkage lift cylinder I just found a strong magnet works well , the piston got stuck but some very light taps with a raw hide mallet shifted it , I also took the precaution of wrapping a piece…

evening Tobias I'm working on the hydraulics at the moment I have the covr plate off , do you know the technique for pulling the piston out?

thank you Tobias I will get myself a manual, I've asked a few tractor mechanics here in Ireland but it seems this model is pretty rare here in Ireland so I very much appreciate your help and advice
Phill