Hello
How many digits does the vin number have? I have found two numbers, one is 5 and one 6 digits. Tractor is also missing manufacturer plate.
Hello
How many digits does the vin number have? I have found two numbers, one is 5 and one 6 digits. Tractor is also missing manufacturer plate.
I got W7 24 rims and also new 8.3 24 tires and new 5 16 tires on the front, previously there were 6 16 also new.
Now the tractor is perfectly balanced. Problem now is that I dont like tractor visually, rear tires look much too narrow for my taste.
Can 9.5 24 tires be put on W7 24 rim? And if I mount 9.5 24 tires tractor will again lean on the front with 5 16 tires, so I guess I have to change the front with 5.5 16 or 6 16?
This Fendt will get me broke
Thank you for links. Above all I'm looking for 24 but first link doesnt answer any messages for 3 days now.
I also found these:
https://www.treckergarage.de/c…24_Reifen_9.00_24_AS.html
Do you think these are from Fendt and if they fit on F15? Seller doesnt know.
Alles anzeigenHi,
the wheels on the rear axle are too big. There should be wheels of size 8-20 or 8-24. Your tractor also has the front axle that matches the low tires on the rear axle. Swap the tires for a size 8-20 or 8-24, then everything will fit perfectly.
Greetings from Germany
Paul
Which size are yours?
So with 20 or 24 inch and appropriate tires, tractor will be balanced?
Anyone knows where to get 24 rims?
Hello after long time
Tractor is almost finished but I have enormous problem with the wheels and tires. As is seen on the picture, tractor is way too tall on the rear side. Previously there were 10 28 tires on, but I dont have any picture of the tractor with fully inflated tires. Now It has 11.2 28 tires which should be identical but rear is obviously too tall.
One option is that I change tires with 9.5 28 which are 115 cm high (11.2 are 120cm) and I get 2,5 cm lower rear, but I'm afraid It won't be enough, 8.3 are probably too narrow for these wheels? Another option is to get new 24 wheels, or 32?
Any suggestions?
I have trouble finding this spare part called "Zahnkranz" for Fendt F15. There is similar part avaliable for models F12 and F24 and for both it is noted that have 132 gears, although without dimension info. I asked site owner for diameter dimensions but so far haven't got the answer.
I counted gears on mine F15 Zahnkranz and there are 150 and diameter is approximately 460 mm, I'm also pretty sure that this isn't orginal one and is from some Deutz model, could be this one but I'm not 100% sure:
https://www.huber-parts.de/geb…29/deutz-f2l514-zahnkranz
I also checked Ersatzteilliste manual for F15 but there is no info whatsoever about any dimensions. It seems logical to me that if F12 and F24 had the same Zahnkranz, that F15 also has the same one. Can someone please confirm me this info or maybe count the number of gear on yours F15 Zahnkranz and let me know.
https://www.huber-parts.de/geb…eselross-f12-gh-zahnkranz
Hello,
what does flywheel ring gear mean? Could you send a picture to us?
f18h-doc
At the moment I have only this picture, not sure about the right expression, I got the phrase via google:
Would buy...also from some other model maybe F12 if it fits.
Is this original F15? Pedals seem little difrrent than mine.
Searching for Fendt F15 Kupplungspedal because I broke mine, also would be intrested in Kupplungsgabe.
Selling F15 mower part...
Hello,
I come from Slovenia and recently I began restoration of Fendt F15. I don't have any official papers of tractor and manufacturer plate has been stolen but i've been told that tractor is production year of 1950. All I know that previous owner was also from Slovenia and that tractor went over at least one attempt of restoration altough a bad one.
I just realized that unfortunately I haven't taken even one good photo of complete tractor although I take hundreds of every separete parts before I remove them off tractor. Anyways, here are few just to get the picture.
[Blockierte Grafik: http://shrani.si/f/1n/dD/3EMnWeuY/dsc01762.jpg]
[Blockierte Grafik: http://shrani.si/f/2T/Wr/4TyVSuPz/dsc01764.jpg]
[Blockierte Grafik: http://shrani.si/f/O/hY/2034dS0u/dsc01765.jpg]
Currently I'm still in the process of removing components. Plan is new paint job, engine rebuild, new electrics and so forth.
I would like to know if there is avaliable any documentation or some sort of workshop manual of this model and can you please tell me any source of information that could help me with the project.
Where is best to get new parts, so far I only found Granit.
One more question, what is G6 and H6 version and how can I determine which one is mine?
Thank you for any help.
If there will be some interest I will gladly post updates of progress.
PS. Please feel free to write in german, I understand everything with google translate.